Lexmark C734dn Service Manual page 43
Hide thumbs
Also See for C734dn:
- User manual (216 pages) ,
- Wireless setup manual (35 pages) ,
- Connection manual (5 pages)
Table of Contents
Advertisement
Error code
Action
Load Manual <type>
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
<size>
pressing Select indicates to the printer it should search for a source with the proper type and
size.
Additional messages may include:
Paper Changes Needed
PC Unit Exposure
This warning occurs when the front door is left open too long. Close the front door to prevent
damage to the PC unit. Select Tell me more for further information.
Warning
Remove All Color
If Color Lockout mode is enabled, this message appears (unless the printer is in Diagnostics
Supplies
Menu or Configuration Menu).
Remove Paper
The standard output bin is full. Remove the media to continue.
Standard Bin
If packaging material is detected by the printer, Check all areas, Check <area name>, or
Remove Packaging
Check <number of> areas may appear. Press Select to continue.
Material
Restore Held Jobs
If the printer detects Print and Hold (or parked) jobs stored on the hard disk during Power-On
Go/Stop?
Self Test (POST). Choices are:
Securely Clearing Disk
Disk wiping process is recovering disk space. The message clears when all memory blocks
Space
are cleared.
Tray Length Guide
Replace the tray length guide.
Missing
Unsupported USB
Remove the unrecognized device to continue.
device, Please Remove
Unsupported USB hub,
Remove the unrecognized device to continue.
Please Remove
Unsupported Mode
Unplug camera and change it to a mode where the camera can access PictBridge. Plug the
camera back in to continue.
Unsupported Disk
Remove the unsupported disk to continue.
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Restore—Print jobs are restored, and Restoring Held Jobs x/y, where x is the number
of the job restored and y is the total number of jobs to restore. You can quit restoring, and
the remainder of the jobs will remain on the disk, but cannot be accessed until they are
restored at the next POR.
• Do not restore—Held jobs will remain on the disk, but cannot be accessed until they are
restored at the next POR. Held jobs may not be restored appears.
• Tell me more—additional information is available
5026
Diagnostic information
2-7
Previous
Next
Go Back
Advertisement
Table of Contents
