5026
Step
Questions / actions
1. Reseat the HVPS card.
9
2. Make sure the contacts is properly aligned
with the HVPS.
Does this fix the problem?
Tray linking service check
Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the
next linked tray. When the Paper size and Paper Type settings are the same for any trays, the trays are
automatically linked.
Step
Questions / actions
Load the same size and type of paper in each
1
tray. Move the paper guides to the correct
positions for the paper size loaded in each
tray.
Does tray linking work properly?
Print a menu settings page from the Admin
2
Menu, and compare the settings for each tray.
Are the settings for each tray to be linked the
same for paper type and paper size?
Service Manual
2-140
Yes
Problem resolved.
Yes
Problem resolved.
Problem resolved.
No
Replace the HVPS. See
"High-voltage power
supply (HVPS) removal"
on page
4-108.
No
Go to step 2.
In the Admin menus, set the
same settings for paper size
and paper type in each tray.
Previous
Next
Go Back