Contact Springs Kit Removal - Lexmark C734dn Service Manual

5026

Contact springs kit removal

See
"Contact springs kit, including:" on page 7-11
Charge roll contact spring removal
Remove the HVPS. See
1.
Remove the charge roll contact springs (A). Be sure to push the springs under the retainers that hold them
2.
in place.
Installation note: Make sure the springs are behind the retainers when installing the new springs.
Service Manual
4-70
for the part number.
"High-voltage power supply (HVPS) removal" on page 4-108.
Retainer
A
Previous
Next
Go Back