Managing The Network Connection; Making Subsystem Management Port Settings; Making Controller Management Port Settings - Promise Technology VTRAK E310f Product Manual

External disk array subsystem
Hide thumbs Also See for VTRAK E310f:
Table of Contents

Advertisement

Managing the Network Connection

The network connection deals with network connections to the VTrak's
Management Ports. Functions include:
Making Subsystem Management Port Settings (page 71)
Making Controller Management Port Settings (page 71)

Making Subsystem Management Port Settings

The VTrak subsystem has a virtual management port. When you log into the
VTrak over your network, you use the virtual management port. This
arrangement enables you to log into a VTrak with two controllers using one IP
address.
Before you change settings, please see "Choosing DHCP or a Static IP Address"
on page 30.
To make changes to the Subsystem Management Port settings:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Network Management
4.
Click the Port Configuration link in Management View.
5.
To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter:
Primary IP address
Primary subnet mask
Default gateway IP address
Enter a primary DNS server IP address.
6.
Click the Submit button.

Making Controller Management Port Settings

The controller has an IP addresses for access when the controller goes into
maintenance mode. Maintenance mode is only for remedial action in the event of
a problem with the controller. See "Controller Enters Maintenance Mode" on
page 285 for more information.
To make changes to the Controller Management Port settings:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Network Management
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vtrak e310s

Table of Contents