Promise Technology VTRAK E310f Product Manual page 185
External disk array subsystem
Hide thumbs
Also See for VTRAK E310f:
- Product manual (340 pages) ,
- Product manual (434 pages) ,
- Quick start manual (431 pages)
Table of Contents
Advertisement
Before you change settings, please see "Choosing DHCP or a Static IP Address"
on page 30.
Making Automatic Settings
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight Maintenance Mode Network Configuration and press Enter.
3.
Highlight the controller you want and press Enter.
4.
Highlight DHCP and press the spacebar to toggle to Enabled.
5.
Press Ctrl-A to save your settings.
Making Manual Settings
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight Maintenance Mode Network Configuration and press Enter.
3.
Highlight the controller you want and press Enter.
4.
Highlight DHCP and press the spacebar to toggle to Disabled.
5.
Highlight each of the following and press the backspace key to erase the
current value, then type the new value.
•
IP Address
•
Subnet Mask
•
Default Gateway IP Address
•
DNS Server IP Address
6.
Press Ctrl-A to save your settings.
Chapter 5: Management with the CLU
171
Advertisement
Table of Contents
