Making Buzzer Settings - Promise Technology VTRAK E310f Product Manual

Making Buzzer Settings

This function enables the buzzer on the controller. When you first power-up the
VTrak, it beeps twice to show normal operation. To change buzzer settings:
1. From the Main Menu, highlight Buzzer and press Enter.
A list of Controllers appears with the current buzzer setting and status.
2. Highlight the Controller whose buzzer you want to set and press Enter.
3. Highlight Enabled and press the spacebar to toggle between Yes and No.
4. Press Ctrl-A to save your settings.
The buzzer provides the audible alarm. See "VTrak is Beeping" on page 250.
Chapter 5: Management with the CLU
203