Promise Technology VTRAK E310f Product Manual page 279

Reported Event
Fibre Channel
Fibre Channel controller
has detected bus reset
Fibre Channel controller
has received a LUN reset
command.
Fibre Channel controller
has encountered a fatal
error
Fibre Channel link is up
Fibre Channel link is
down
Fibre Channel controller
settings have changed
Host Interface Controller
Host-interface controller
has detected bus reset
Host-interface controller
has encountered an
unrecoverable error
Host-interface controller
has received an abort-
task/ abort task set/clear
task set command.
Host-interface controller
has received an clear
ACA command.
Host-interface controller
has received a LUN reset
command.
Host-interface controller
has received a bus reboot
The initiator sent a reset command. If this message
appears repeatedly, contact Technical Support. See
page 293.
Result of user action. Normal.
Restart the VTrak. See page 207. If this message
appears repeatedly, contact Technical Support. See
page 293.
FC link connected and ready. Normal.
FC link disconnected or otherwise not working.
Result of user action. Normal.
The initiator sent a reset command. If this message
appears repeatedly, contact Technical Support. See
page 293.
Restart the VTrak. See page 207.
Result of user action. Normal.
Result of clearing an auto contingent alliance
condition. If this message appears repeatedly,
contact Technical Support. See page 293.
Result of user action. Normal.
The VTrak rebooted itself. If this message appears
repeatedly, contact Technical Support. See
page 293.
265
Chapter 8: Troubleshooting
Corrective Action