Shutting Down The Subsystem; Shutting Down The Vtrak - Telnet Connection; Shutting Down The Vtrak - Serial Connection - Promise Technology VTRAK E310f Product Manual
External disk array subsystem
Hide thumbs
Also See for VTRAK E310f:
- Product manual (340 pages) ,
- Product manual (434 pages) ,
- Quick start manual (431 pages)
Table of Contents
Advertisement
VTrak E-Class Product Manual
Shutting Down the Subsystem
There are two methods for shutting down the subsystem. Choose one of the
following procedures:
•
Shutting down the VTrak – Telnet Connection (page 200)
•
Shutting down the VTrak – Serial Connection (page 200)
Shutting down the VTrak – Telnet Connection
This function enables you to shutdown the VTrak subsystem on a Telnet
connection. You can only do part of this procedure in the CLU. Additional action
is required, as described below. To shutdown the VTrak:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight Shutdown or Restart and press Enter.
3.
Highlight Shutdown or Restart and press Enter.
4.
Highlight Option and press the spacebar to display Restart.
5.
Highlight Submit and press Enter.
A warning message appears.
6.
Press Y to continue.
The screen will go blank.
7.
Wait for no less than two minutes.
8.
Manually turn off the power supply switches on the back of the subsystem.
Shutting down the VTrak – Serial Connection
This function enables you to shutdown the VTrak subsystem on a serial
connection. You can only do part of this procedure in the CLU. Additional action
is required, as described below. To shutdown the VTrak:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight Shutdown or Restart and press Enter.
3.
Highlight Shutdown or Restart and press Enter.
4.
Highlight Option and press the spacebar to display Restart.
5.
Highlight Submit and press Enter.
A warning message appears.
6.
Press Y to continue.
7.
Turn off the power supply switches when you see the following message:
200
Advertisement
Table of Contents
