Managing Enclosures
On VTrak E-Class, enclosures include the main VTrak subsystem or Head Unit
as well as additional enclosures that are connected to it through cascading or
expansion. Enclosure Management includes the following functions:
•
Viewing the Enclosures (page 103)
•
Locating an Enclosure (page 103)
•
Viewing Enclosure Topology (page 104)
•
Viewing Enclosure Information (page 105)
•
Making Enclosure Settings (page 105)
•
Viewing FRU VPD Information (page 105)
•
Checking the Batteries (page 106)
•
Reconditioning a Battery (page 107)
•
Making Buzzer Settings (page 107)
•
Testing the Buzzer (page 107)
Viewing the Enclosures
To view information about the enclosures:
1.
Click the Subsystem
2.
Click the Enclosures
The following information is shown:
•
Enclosure ID number
•
Enclosure Type
•
Operational Status
•
Status Description – Specific components in need of attention, if any
Locating an Enclosure
To locate an enclosure (subsystem):
1.
Click the Subsystem
2.
Click the Enclosures
3.
Click the Locate Enclosure button.
The Disk Status LEDs on the front of the enclosure will flash for one minute.
See the illustrations below.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon in Tree View.
icon.
103