Promise Technology VTRAK E310f Product Manual page 233
External disk array subsystem
Hide thumbs
Also See for VTRAK E310f:
- Product manual (340 pages) ,
- Product manual (434 pages) ,
- Quick start manual (431 pages)
Table of Contents
Advertisement
3.
Disconnect the Fibre Channel or SAS cables, management, serial and
power cables.
4.
On the controller handle, press the release button and pull the handle
downward. See Figure 13.
5.
Pull the controller out of the VTrak enclosure.
Installing the new controller
To install the new controller:
1.
Carefully slide the controller into the enclosure.
2.
Gently press the handle in and upward until it locks. See Figure 13.
3.
Connect the Fibre Channel or SAS cables, management, serial and power
cables.
4.
Switch on the power.
The VTrak will restart. For more information about VTrak's start-up behavior,
see "Connecting the Power" on page 27.
219
Chapter 6: Maintenance
Advertisement
Table of Contents
