Making Telnet Settings; Making Snmp Settings - Promise Technology VTRAK E310f Product Manual

Making Telnet Settings

VTrak's Telnet service enables you to access VTrak's Command Line Interface
(CLI) through a network connection. To make Telnet settings:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Telnet Setting link in Management View.
4. Enter the Telnet Port number.
2300 is the default.
5. Enter the Maximum Number of Connections.
4 is the default.
6. Enter the Session Time Out interval.
24 minutes is the default.
7. Click the Submit button.
8. Click OK in the confirmation box to restart the Telnet service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
• Click on the Automatic option to start the service automatically during
system startup. Recommended.
• Click on the Manual option to start the service manually (the service
does not start during system startup).
2. Click on the Submit button.
Stopping Telnet service
To stop the Telnet service:
1. Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting Telnet service
To start or restart the Telnet service, click the Start or Restart button.

Making SNMP Settings

VTrak's SNMP service enables the SNMP browser to obtain information from the
VTrak. The Trap Sink is where SNMP events are sent and can be viewed.
To change the SNMP settings:
1. Click the Subsystem
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon in Tree View.
87