VTrak E-Class Product Manual
Figure 5. VTrak E310s rear view
Power Supply 1
RAID Controller 1
Figure 6. Fan LED on a cooling unit
Under normal conditions, the power supply and fan LEDs should display green.
LEDs
Power supply
Fan
To check a component's installation, follow the same procedure as replacing the
component, except that you reinstall the original component rather than a new
one. In most cases, this action fixes a bad connection and allows VTrak to detect
the component. If this action does not correct the problem, replace the unit. See
page 205 for instructions.
The Controller Location LEDs, on the back of the VTrak subsystem, will flash for
one minute.
Cooling Unit 1
with Battery
Mgmt
UPS
115200
8 N 1
Dark
Not detected
Not detected
Cooling Unit 2
with Battery
RAID Controller 2
Fan LED
State
Green
OK
Fan failed
OK
Wrong speed
254
Power Supply 2
Mgmt
UPS
115200
8 N 1
Amber
Failed
Failed
Red