Accepting An Incomplete Array; Enabling Media Patrol On A Disk Array; Enabling Pdm On A Disk Array; Preparing The Disk Array For Transport - Promise Technology VTRAK E310f Product Manual

VTrak E-Class Product Manual
Maximum of 32 characters. Use letters, numbers, space between words and
underscore. An alias is optional.
4. Press Ctrl-A to save your settings.

Accepting an Incomplete Array

This condition is the result of a missing physical drive. See "Incomplete Array" on
page 279 before you use this function.
To accept an incomplete array:
1. From the Main Menu, highlight Disk Array Management and press Enter.
2. Highlight the disk array you want and press Enter.
3. Highlight Accept Incomplete Array and press Enter.

Enabling Media Patrol on a Disk Array

Media Patrol checks the magnetic media on physical drives.
To run Media Patrol on a disk array:
1. From the Main Menu, highlight Disk Array Management and press Enter.
2. Highlight the disk array you want and press Enter.
3. Highlight Media Patrol and press the spacebar to toggle between Enable
and Disable.
4. Press Ctrl-A to save your settings.

Enabling PDM on a Disk Array

This function enables and disables Predictive Data Migration (PDM).
To enable or disable PDM:
1. From the Main Menu, highlight Disk Array Management and press Enter.
2. Highlight the disk array you want and press Enter.
3. Highlight PDM and press the spacebar to toggle between Enable and
Disable.
4. Press Ctrl-A to save your settings.
See "Running PDM" on page 164.

Preparing the Disk Array for Transport

To run the Transport function on a disk array:
1. From the Main Menu, highlight Disk Array Management and press Enter.
2. Highlight the disk array you want and press Enter.
162