Clu Reports A Problem; Viewing Runtime Events; Viewing Nvram Events - Promise Technology VTRAK E310f Product Manual

VTrak E-Class Product Manual

CLU Reports a Problem

The CLU reports information passively—you must determine which functions to
check based on the sound of the VTrak's audible alarm (see page 250) and any
amber or red LEDs (see page 251).
Check the event logs first. Then check the reported component.

Viewing Runtime Events

To display Runtime Events:
1. From the Main Menu, highlight Event Viewer and press Enter.
The log of Runtime Events appears. Events are added to the top of the list.
Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
Press the up and down arrow keys to scroll through the log.

Viewing NVRAM Events

This screen displays a list of and information about 63 most important events
over multiple subsystem startups.
To display NVRAM events:
1. From the Main Menu, highlight Event Viewer and press Enter.
2. Highlight NVRAM Events and press Enter.
The log of NVRAM Events appears. Events are added to the top of the list.
Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
3. Press the up and down arrow keys to scroll through the log.
256