Setting Redundancy For The Subsystem; Setting Subsystem Date And Time; Viewing The Runtime Event Log - Promise Technology VTRAK E310f Product Manual

VTrak E-Class Product Manual
3. Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words,
and underscore.
4. Click the Submit button.

Setting Redundancy for the Subsystem

To set redundancy for this subsystem:
1. In Tree View, click the Subsystem
2. In Management View, click the Settings tab.
3. In the Redundancy Type dropdown menu, select:
• Active-Active – Both RAID controllers are active and can share the load
• Active-Standby – One RAID controller is in standby mode and goes
active if the other fails
4. Click the Submit button.
If you change Redundancy Type, be sure both controllers are properly installed in
the subsystem before you restart.
If your subsystem has dual controllers and they are set to Active-Active, you can
use the LUN Affinity feature. See "Making Controller Settings" on page 101.

Setting Subsystem Date and Time

To set a Date and Time for this subsystem:
1. In Tree View, click the Subsystem
2. In Management View, click the Settings tab dropdown menu and select Date
and Time Settings.
3. Under Subsystem Date, select the Month and Day from the dropdown
menus.
4. Type the current year into the Year field.
5. Under Subsystem Time, select the Hour, Minutes and Seconds from the
dropdown menus.
6. Click the Submit button.

Viewing the Runtime Event Log

Runtime Events lists information about the 1023 most recent runtime events
recorded since the system was started. To view runtime events:
1. In Tree View, click the Subsystem
icon.
icon.
icon.
56