VTrak E-Class Product Manual
Working with LUN Mapping
LUN Mapping includes the following functions:
•
Viewing a List of Initiators (page 184)
•
Enabling LUN Mapping (page 184)
•
Creating an Initiator (page 184)
•
Mapping a LUN to an Initiator (page 185)
•
Deleting an Initiator (page 185)
Viewing a List of Initiators
LUN Mapping must be enabled in order for VTrak to recognize a Fibre Channel
or SAS initiator. To view a list of initiators:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
A list of the current initiators appears.
Enabling LUN Mapping
To enable LUN mapping:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
A list of the current Fibre Channel or SAS initiators appears.
LUN Mapping must be enabled in order for VTrak to recognize the initiator. If
LUN Mapping is currently disabled, highlight Enable LUN Mapping and press
Enter.
Creating an Initiator
You must add an initiator to the VTrak's initiator list in order to use the initiator to
create a LUN. You can also add initiators under Fibre Channel Management see
page 174 or SAS Management, see page 176.
To create (add) a new initiator:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
3.
Highlight Create New Initiator and press Enter.
4.
Type the name of the initiator.
184