Locating The Controller - Promise Technology VTRAK E310f Product Manual

VTrak E-Class Product Manual
5. Make the following settings as required:
• Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore. An alias is optional.
• Highlight LUN Affinity and press the spacebar to toggle between
Enabled and Disabled.
• Highlight Coercion and press the spacebar to toggle between Enable
and Disable.
• Highlight Coercion Method and press the spacebar to toggle through:
GB Truncate – Reduces the capacity to the nearest 1 GB boundary
10 GB Truncate – Reduces the capacity to the nearest 10 GB boundary
Grp (group) Rounding – Uses an algorithm to determine truncation.
Results in the maximum amount of usable drive capacity
Table Rounding – Applies a predefined table to determine truncation
• Highlight Cache Flush Interval and press the backspace key to erase
the current value. Type a new interval value (1 to 12 seconds).
• Highlight SMART and press the spacebar to toggle between Enable and
Disable.
• Highlight SMART Poll Interval and press the backspace key to erase the
current value. Type a new interval value (1 to 1440 minutes).
• Highlight Adaptive Writeback Cache and press the spacebar to toggle
between Enabled and Disabled.
6. Press Ctrl-A to save your settings.

Locating the Controller

To locate this controller:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Controller Management and press Enter.
3. Highlight the controller you want and press Enter.
4. Highlight Controller Settings and press Enter.
5. Highlight Locate Controller and press Enter.
Controller Dirty Cache
Controller, will flash for one minute.
LED and Status
148
LED, on the back of the