Managing The Network Connection; Making Management Port Settings - Promise Technology VessRAID 1740s Product Manual

Managing the Network Connection

The network connection deals with the VessRAID's Management Port.
• Making Management Port Settings (below)

Making Management Port Settings

When you log into WebPAM PROe over your network, you use the VessRAID's
management port.
Before you change settings, please see "Choosing DHCP or a Static IP Address"
on page 24.
To make changes to the Management Port settings:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Network Management
4. Click the Port Configuration link in Management View.
5. To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter:
• Primary IP address
• Primary subnet mask
• Default gateway IP address
• Enter a primary DNS server IP address.
6. Click the Submit button.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
63