Setting An Alias For The Subsystem; Setting Subsystem Date And Time; Viewing The Runtime Event Log - Promise Technology VessRAID 1740s Product Manual

Setting an Alias for the Subsystem

An alias is optional. To set an alias for this subsystem:
1. In Tree View, click the Subsystem
2. In Management View, click the Settings tab.
3. Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words,
and underscore.
4. Click the Submit button.

Setting Subsystem Date and Time

To set a Date and Time for this subsystem:
1. In Tree View, click the Subsystem
2. In Management View, click the Settings tab dropdown menu and choose
Date and Time Settings.
3. Under Subsystem Date, choose the Month and Day from the dropdown
menus.
4. Type the current year into the Year field.
5. Under Subsystem Time, choose the Hour, Minutes and Seconds from the
dropdown menus.
6. Click the Submit button.

Viewing the Runtime Event Log

Runtime Events lists information about the 1023 most recent runtime events
recorded since the system was started. To view runtime events:
1. In Tree View, click the Subsystem
2. In Management View, click the Events tab dropdown menu and choose
Runtime Events.
Events are displayed by:
• Item Number – A consecutive decimal number assigned to a specific
event
• Device – Battery, controller, logical drive, physical drive, port, etc.
• Event ID – The hexadecimal number that identifies the specific type of
event
• Severity – Information, Warning, Minor, Major, Critical, and Fatal. The
severity level is user-specified. See "Setting-up User Event
Subscriptions" on page 59.
Chapter 4: Management with WebPAM PROe
icon.
icon.
icon.
49