Control Options And Status Displays On A Pc Or The Ds-L2 - Nikon ECLIPSE L200ND / ECLIPSE L200N Instructions Manual

4.15.2 Control options and status displays on a PC or the DS-L2

The table below shows control options and status displays of a unit that can be controlled
on a PC or the DS-L2 connected to L200ND/L200N via the USB cable.
The "/" indicates control/status display is unavailable.
Note:
Table-6
Unit
Control
12V50W Lamp lit/unlit,
Precentered lamp brightness
Lamphouse adjustment
C-HGFIE Changing the
Precentered shutter
Fiber Illuminator open/close, ND
(Neutral Density)
*1
Revolving Rotation of the
nosepiece revolving
nosepiece
Aperture Aperture
diaphragm diaphragm
open/close
EPI/DIA Changing EPI/DIA
Control access Changing
PC/L200N
(L200ND)
BF/DF /
Objective Registering
information
information on the
objective
*1 Shutter open/close or ND selection can be changed using the remote controller (C-HGFIE-C HG
controller) exclusive for the C-HGFIE.
*2 Remote controller (C-HGFIE-C HG controller) exclusive for the C-HGFIE is required for
controlling the unit.
4 Assembly
To control L200ND/L200N on a PC or to display the current status of the
L200ND/L200N on a PC, use the "SDK" in the supplied "L200N Setup Tool"
software. The SDK is automatically installed when you install the L200N Setup
Tool software.
For details on how to install the software on a PC, refer to the software manual
supplied with the L200N Setup Tool.
Control options for the unit using the PC/DS-L2
PC
Status
Lamp lit/unlit,
lamp voltage
Shutter
open/close, ND
(Neutral Density)
Nosepiece
address
Aperture
diaphragm
open/close
EPI/DIA
PC/L200N
(L200ND)
BF/DF
Objective
information
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
DS-L2
Control Status
/ Lamp lit/unlit,
lamp voltage
/ Shutter
open/close, ND
*2
(Neutral Density)
/ Nosepiece
address
/ Aperture
diaphragm
open/close
/ EPI/DIA
/ /
/ BF/DF
/ Objective
information
46
Notes
–
RS232C cross cable must
be used for the connection
of the C-HGFIE and the
L200ND microscope to
control the shutter
according to the rotation of
the motorized nosepiece. If
you fail to make this
connection, a fire of light
may enter in the view-field
at the rotation of the
motorized nosepiece.
Control available for
L200ND only.
Brightness or EPI/DIA
control available from the
unit with control access
only.
PC: control access granted
to PC
L200N (L200ND): control
access granted to
L200ND/L200N
Refer to "4.15.3 Registering
information on the
objective."