4 SETTING ITEMS (ADMIN)
SETTING E-MAIL FUNCTIONS
Setting the Scan to E-mail Message Properties
You can configure the message properties of E-mail documents that will be sent by Scan to E-
mail operation.
1
Press the [E-MAIL] button.
The E-MAIL screen is displayed.
To display the ADMIN menu, see "ENTERING TO ADMIN MENU".
2
Press each button to enter the E-mail properties.
[FROM ADDRESS] — Press this to enter the E-mail address of this equipment.
[FROM NAME] — Press this to enter the identification name of this equipment.
[BODY] — Press this to enter the body message.
You must enter the [FROM ADDRESS] button to enable Scan to E-mail.
When you press each button, the input screen is displayed. Enter the value using the
keyboard and digital keys, and press the [ENTER] button to set the entry.
3
Press the [ENTER] button.
180
SETTING E-MAIL FUNCTIONS
P.107