Software Specifications; Tcp/Ip Specifications; Lpd Specifications; Ftp Specifications - SATO HR2 Series Operator's Manual

Section 7: Interface Specifications
7.4 LOCAL AREA NETWORK (LAN) ETHERNET (Cont'd)

7.4.2 Software Specifications

Protocol
Network layer
Session layer
Application layer
Notes
• Send the print data by LPR and FTP of TCP/IP and dedicated socket protocol.
• Use socket connection to get the printer status.

7.4.3 TCP/IP Specifications

In TCP/IP protocol environment, LPD and FTP are provided for printing. TELNET for the setup of variable,
and RARP and DHCP for the setup of each address are available.
In socket connection, the transmission of print data and the printer status can be monitored. Note that multiple
sessions cannot be established at the same time.
Windows2000/XP/Server2003/Vista operating systems support LPD of TCP/IP that enables you to print.
In Windows2000(excluding Advanced Server)/XP/Server2003(R2 is yet to be verified)/Vista environments, IP
address and various items are settable by the utility [Network setting tool].

7.4.4 LPD Specifications

LPD protocol complies with RFC1179 and handles the list of logical printer name as queue name such as lp,
sjis and euc.
Queue name
lp
sjis
euc
When sending a job by LPR, the transmission order of data file/control file within the job does not affect the
printing operation.
Notes
• A job deletion by LPR is not supported.
• LPD can be used for STATUS4 only
• When large quantity printing is performed by LPD, data may be lost caused by Windows specification.
• Banner page print is not supported.

7.4.5 FTP Specifications

FTP protocol complies with RFC959 and handles the list of logical printer name as transfer directory. File
transfer to this directory executes print operation. Note that it is possible to specify ASCII(A), BINARY(I), and
TENEX(L8) as transfer modes, although mode difference is dependent on the client side.
There are three directory names such as lp, sjis and euc.
Page 7-8
TCP/IP
ARP, RARP, IP, ICMP
TCP, UDP
LPD, FTP, TELNET, DHCP
Kanji filter applied
Not available
Available
Available
Input Kanji code
N/A
Shift JIS
EUC
HR2 Series Operator Manual