Back View - SATO HR2 Series Operator's Manual

Section 1: Introduction
1.3 PARTS IDENTIFICATION (cont'd)

Back view

LAN Interface connector
1
To connect printer to the host computer using
the LAN interface.
USB Interface connector
2
To connect printer to the host computer using
the USB interface.
AC IN power terminal
3
Supplies power to the printer by inserting the
power cable.
Before connection, ensure that the AC voltage
of your region is within the range of AC 100 to
240V, 50/60 Hz.
Page 1-4
FUSE (F-400-01A2) holder
4
Used to hold a fuse which protect the printer
from unstable power supply surge. Use fuse
with rating, 250V/5A -LF (218 005.MXP) only.
RS-232C (DSUB9 pin-female) Interface
5
connector
To connect printer to the host computer using
the RS232C serial interface.
Or, to connect to the optional SATO keypad.
External connector terminal (EXT)
6
Interface connector for external signals.
Connect the optional application to this
terminal.
1
2
3
4
5
6
HR2 Series Operator Manual