Enabling Interface Card Configuration - SATO HR2 Series Operator's Manual

Section 3: Operation and Configuration
3.7 INTERFACE MODE (Cont'd)

3.7.2 Enabling Interface Card Configuration

After selecting the interface for the Data port or Sub port, the next display shows the selected interface to be
configured. Refer to the following flowcharts of all the setting and LCD display menus available for LAN, RS-
232C and USB interfaces.
Setting of LAN
From DATA PORT
LINE
button
Select DHCP +
FEED button
LINE
button
LINE
button
LINE
button
LINE
button
LINE
button
LINE
button
Page 3-18
or SUB PORT
screen
FEED
button
Select MANUAL
+ FEED button
Select ENABLE
+ FEED button
Select DISABLE
+ FEED button
+
-
FEED
button
+
-
FEED
button
+
-
FEED
button
+
-
FEED
button
+
-
FEED
LINE
button
button
Displayed only
when STATUS5
is set
FEED
LINE
button
button
FEED button
LINE
button
Displayed only
when STATUS4
is set
FEED button
Proceed to INTERFACE
MODE menu or
EXTERNAL DEVICE
screen
* Press <, > , + or - button to select item or set the
value accordingly. The active icons are displayed on the
screen.
* Press and hold LINE button on each screen will revert
to INTERFACE MODE menu.
HR2 Series Operator Manual