Folder Configuration - SATO HR2 Series Operator's Manual

CONNECTIONS OF OPTIONAL ACCESSORIES
2.7

Folder Configuration

The following is the folder architecture inside the SD card to be used for the printer.
SD card route
PR41
HR2 Series Operator Manual
DATA
Data for memory card command
Form overlay registration
Format registration
Graphic registration
BMP file registration
PCX file registration
Memory card 16x16 Extended character registration : SBPL16.BMF
Memory card 24x24 Extended character registration : SBPL24.BMF
PROG
Firmware
Firmware
SEMBL Program
FONT
Download font / log
Download font data
CONF
Printer configuration information
Printer configuration information file : PRN41.INI
RAS
Rasterized font
No corresponding files for HA200R/HR200
LOG
Maintenance
Receive buffer
STATUS5 log
FRAM dump
(cont'd)
SBPLXXXX.OVL (XXXX : Reg. No.0001 to 0099)
: SBPLXXXX.FMT (XXXX : Reg. No. 0001 to 0999)
: SBPLXXXX.IMG (XXXX : Reg. No. 0001 to 0999)
: SBPLXXXX.BMP (XXXX : Reg. No. 0001 to 0999)
: SBPLXXXX.PCX (XXXX : Reg. No. 0001 to 0999)
: PRG41_XX.BIN (XX : Reg. No. 01 to 03)
SEMBL.BIN
: USRFONTX.DAT
: RCVBUF.DAT
: HISTSTS5.DAT
: FRAMDMP.DAT
Section 2: Installation
(X : Reg. No. (1 to 6))
Page 2-23