How To Clean The Printer (Cleaning Sheet) - SATO HR2 Series Operator's Manual

4.2 HOW TO CLEAN THE PRINTER (CLEANING KIT) (Cont'd)
4. Wipe off the dirt on the feed roller using a cleaning cloth
dabbed with the cleaning liquid. (See figure on the right).
5. Wipe off the dirt on the platen roller using a cleaning
cloth dabbed with the cleaning liquid. (See figure on the
right).

4.3 HOW TO CLEAN THE PRINTER (CLEANING SHEET)

If certain stains on the print head cannot be removed easily with cotton swabs dabbed in cleaning solution, the
cleaning sheet is used for clearing such stubborn debris on the print head.
1. Make sure the printer is powered off and remove the
power cable.
2. Lift up the top cover.
The print head is now accessible.
3. Remove the media and the ribbon.
4. Put the head cleaning sheet between the print head
and the platen roller. The coarse side of the cleaning
sheet should face the surface of the print head
elements.
5. Close the top cover. The print head should lock into
place firmly.
6. Using both hands, pull the cleaning sheet outwards,
toward your body. This will remove any dirt stuck to the
print head.
HR2 Series Operator Manual
Section 4: Cleaning and Maintenance
Cleaning
sheet
Page 4-3