Replacing brake pads
Front brake
e
Caution:
Do not separate the brake calliper halves.
•
Firmly press the brake calliper against the brake
disc in order to force back the brake pads and
pistons
L
Note:
If the brake pads/pistons cannot be forced back in
this way, there may be some other fault in the brake
system.
1
•
Remove the split-pin keeper (2) from retaining
pin (1)
2
C1340380
•
Remove retaining pin (1) using drift or pliers,
BMW No. 34 1 541
•
Remove the brake pads
When installing:
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following
e
Caution:
Do not damage the brake pads when installing.
•
Check the function of the brake system
e
Caution:
The fluid level in the brake fluid reservoir must be at
the "MAX" mark after the brake pads have been
changed. It is not possible to check the maximum fill
level at the inspection glass. For details of the cor-
rect procedure see Checking fluid level with brake
fluid reservoir open.
1
34 1 541
C1340390
00.51
Need help?
Do you have a question about the C1 and is the answer not in the manual?