Checking Fluid Level With Brake Fluid Reservoir Open - BMW C1 Repair Manual

Checking fluid level with brake fluid
reservoir open
The procedure for checking the level in the left brake
fluid reservoir is described below. The procedure for
checking the level in the right brake fluid reservoir is
analogous.
e
Caution:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle as brake fluid de-
stroys paint.
L
Note:
Do not remove the reservoir cap unless the handle-
bar is turned all the way to the right.
•
Turn the handlebars all the way to the right
•
Secure the handlebar in the full lock position
•
Remove reservoir lid (1) with gaiter
Setting:
Required level with new linings
........................................ Top of sight glass inside
e
When adding brake fluid, do not allow it to enter the
holes for the reservoir lid screws.
1
•
When installing:
•
L
Wipe the rim of the reservoir, the rubber gaiter and
C1340440
the cover to remove brake fluid, and carefully re-
assemble the components.
•
•
Materials:
Brake fluid.....................................................DOT 4
MAX
Caution:
If the brake fluid level does not come up to the
top of the sight glass with new brake pads in-
stalled, top up the fluid level and if necessary,
check the brake system for leaks
Installation is the reverse of the removal proce-
dure: pay particular attention to the following
Note:
Hand-tighten lid of reservoir
Check the function of the brake system
C1340450
00.49