Adding distilled water
•
Remove threaded plugs
L
Note:
Top up battery acid level only with distilled water
•
Add distilled water up to the maximum level mark
•
Installation is the reverse of the removal proce-
dure
Cleaning and greasing the battery
terminals, if necessary
(Inspections III and IV)
–
Remove cover of battery compartment
•
Clean the battery terminals and grease them with
acid-proof battery grease
Materials:
Battery terminal ...............Acid-proof battery grease
00.62
Checking Bowden cables
(Inspections I, II, IV)
•
Check Bowden cables for damage due to chaff-
ing
•
Check freedom of movement and adjust, if nec-
essary
................................................... See Group 32
a
Bowden cable for easy-lift:
•
The small lever must move up and down be-
tween the two limit stops
C1610030
Throttle cable:
•
Move the handlebars all the way from left to right
and check that throttle valve does not move
Checking headlight beam angle
(Inspection IV)
•
Check the setting with 1 person seated on the
C 1
Settings:
Headlight beam throw .. -10cm/10m (-3.9 in/32.8 ft)