Replacing rear left/right turn
63 99 321
indicator bulb
The procedure for the left turn indicator is described
below. The procedure for replacing the right turn in-
dicator is analogous.
e
Caution:
Always switch off the ignition before changing bulbs.
L
Note:
Do not touch inside of reflector and glass of bulbs
with bare hands.
1
3
•
Remove fastener (1).
•
Remove lens (3).
•
Press bulb (2) forward and disengage by turning
it counter-clockwise.
•
Remove bulb.
When installing:
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Fastener for lens ............................................ 2 Nm
Rear lights
63 21 380
–
Remove the rear stowage compartment.
....................................................See Group 46
a
2
•
Open cable ties (arrows).
•
Disconnect plug (1).
C1630010
•
Remove fastener (arrows).
•
Remove rear light cluster.
When installing:
•
Installation is the reverse of the removal proce-
dure.
X
Fastener for rear light cluster.......................... 5 Nm
Replacing rear light cluster
Tightening torques:
1
C1630120
C1630130
63.9