Removing The Rear Shock Absorber Assemblies; Checking The Rear Shock Absorber Assemblies; Installing The Rear Shock Absorber Assemblies - Yamaha YP400T Service Manual

REAR SHOCK ABSORBER ASSEMBLIES AND
1
1
2
SWINGARM
EAS00693
REMOVING THE REAR SHOCK ABSORBER
ASSEMBLIES
1. Stand the scooter on a level surface.
WARNING
_
Securely support the scooter so that there
is no danger of it falling over.
NOTE:
_
Place the scooter on a suitable stand so that
the rear wheel is elevated.
2. Remove:
• rear shock absorber assemblies 1
EAS00695
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLIES
The following procedure applies both of the
rear shock absorber assemblies.
1. Check:
• rear shock absorber rod
Bends/damage → Replace the rear shock
absorber assembly.
• rear shock absorber
Oil leaks → Replace the rear shock
absorber assembly.
• spring
Damage/wear → Replace the rear shock
absorber assembly.
• bolts
Bends/damage/wear → Replace.
EAS00699
INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLIES
1. Install:
• rear shock absorber assembly upper nuts 1
• rear shock absorber assembly lower bolts 2
4 - 67
CHAS
34 Nm (3.4 m · kg, 24 ft · lb)
29 Nm (2.9 m · kg, 21 ft · lb)