Installing The Fuel Hose - Yamaha YP400T Service Manual

THROTTLE BODY AND FUEL INJECTOR
1
a
1
4. Tighten:
• sub-frame adjusting bolts
NOTE:
2
• Tighten the bolt on the left side of the scooter
first.
• Use the pivot shaft wrench 1 and pivot shaft
wrench adapter 2 to tighten the sub-frame
adjusting bolts.
• When tightening the sub-frame adjusting
bolts, make sure that the gap a shown
between the frame and the sub-frame is the
same on both sides of the scooter.
Pivot shaft wrench
Pivot shaft wrench adapter
5. Tighten:
• sub-frame front upper mounting nuts
NOTE:
Tighten the nut on the left side of the scooter
first.

INSTALLING THE FUEL HOSE

1. Install:
• fuel hose
• fuel hose connector cover
CAUTION:
Be sure to connect the fuel hose securely
and install the fuel hose connector cover in
the correct position, otherwise the fuel
hose will not be properly installed.
NOTE:
• Install the fuel hose connector securely onto
the fuel tank until a distinct "click" is heard,
and then make sure that it does not come
loose.
• After installing the fuel hose connector cover
1, make sure that it is installed securely.
7 - 33
FI
4 Nm (0.4 m · kg, 2.9 ft · lb)
90890-01471, YM-01471
90890-01476
54 Nm (5.4 m · kg, 39 ft · lb)