Replacing The Front Brake Pads - Yamaha YP400T Service Manual

2
2
1
3
FRONT AND REAR BRAKES
EAS00579
CAUTION:
_
Disc brake components rarely require dis-
assembly.
Therefore, always follow these preventive
measures:
• Never disassemble brake components
unless absolutely necessary.
• If any connection on the hydraulic brake
system is disconnected, the entire brake
system must be disassembled, drained,
cleaned, properly filled, and bled after
reassembly.
• Never use solvents on internal brake
components.
• Use only clean or new brake fluid for
cleaning brake components.
• Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
• Avoid brake fluid coming into contact
with the eyes as it can cause serious
injury.
FIRST AID FOR BRAKE FLUID ENTERING
THE EYES:
• Flush with water for 15 minutes and get
immediate medical attention.
EAS00581

REPLACING THE FRONT BRAKE PADS

NOTE:
_
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1
1. Remove:
• front brake caliper retaining bolts 1
• front brake caliper 2
• brake pad spring
2. Remove:
• brake pads 1
• brake pad springs 2
• brake pad shims 3
4 - 13
CHAS