Yamaha YP400T Service Manual page 190

FRONT FORK
4. Install:
• outer tube bushing 1
• washer 2
(with the fork seal driver weight 3 and fork
seal driver attachment 4)
Fork seal driver weight
90890-01367, YM-A9409-7
Fork seal driver attachment
(41 mm)
90890-01381, YM-A5142-2
5. Install:
• oil seal 1
New
(with the fork seal driver weight 2 and fork
seal driver attachment 3)
CAUTION:
_
Make sure the numbered side of the oil seal
faces up.
NOTE:
_
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 4 to pro-
tect the oil seal during installation.
6. Install:
• oil seal clip 1
NOTE:
_
Adjust the oil seal clip so that it fits into the
outer tube's groove.
7. Install:
• dust seal 1
(with the fork seal driver weight 2)
Fork seal driver weight
90890-01367, YM-A9409-7
4 - 52
CHAS
New