Changing The Engine Oil - Yamaha YP400T Service Manual

CHECKING THE ENGINE OIL LEVEL/

CHANGING THE ENGINE OIL

1
2
3 - 24
NOTE:
_
• API Service "SE", "SF" and "SG" type or
equivalent (e.g., "SF-SE", "SF-SE-CC", "SF-
SE-SD")
• Before checking the engine oil level, wait a
few minutes until the oil has settled.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
NOTE:
_
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS00076
CHANGING THE ENGINE OIL
1. Remove:
• storage box lower plate
Refer to "RIDER SEAT AND STORAGE
BOX".
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Place a container under the engine oil drain
bolt.
4. Remove:
• engine oil filler cap 1
• engine oil drain bolt 2
(along with the gasket)
5. Drain:
• engine oil
(completely from the crankcase)
CHK
ADJ