Disassembling The Secondary Sheave - Yamaha YP400T Service Manual

3
2
3
2. Loosen:
• clutch shoe assembly nut 1
2
CAUTION:
_
Do not remove the clutch shoe assembly
nut at this stage.
NOTE:
_
1
While holding the clutch shoe assembly with
the rotor holding tool 2, loosen the clutch
shoe assembly nut one full turn with the lock-
nut wrench 3.
3. Remove:
• secondary sheave assembly 1
• V-belt 2
NOTE:
_
Remove the V-belt and secondary sheave
assembly from the primary sheave side.
1
EAS00319
DISASSEMBLING THE SECONDARY
2
SHEAVE
1. Remove:
• clutch shoe assembly nut 1
1
NOTE:
_
Install the sheave spring compressor 2 and
sheave fixed block 3 onto the secondary
sheave assembly as shown. Then, compress
the spring, and remove the clutch shoe assem-
bly nut.
5 - 43
ENG
BELT DRIVE
Rotor holding tool
90890-01235, YU-01235
Locknut wrench
90890-01348, YM-01348
Sheave spring compressor
90890-04134, YM-04134
Sheave fixed block
90890-04135, YM-04135