Yamaha YP400T Service Manual page 187

FRONT FORK
3. Remove:
• dust seal 1
• oil seal clip 2
(with a flat-head screwdriver)
CAUTION:
_
Do not scratch the inner tube.
4. Remove:
• damper rod bolt 1
NOTE:
_
While holding the damper rod with the damper
rod holder 2 and T-handle 3, loosen the
damper rod bolt.
Damper rod holder
90890-01460
T-handle
90890-01326
5. Remove:
• inner tube
M MMM M MMM M M MMM M
a. Hold the front fork leg horizontally.
b. Securely clamp the brake caliper bracket in
a vise with soft jaws.
c. Separate the inner tube from the outer tube
by pulling the inner tube forcefully but care-
fully.
CAUTION:
_
• Excessive force will damage the oil seal
and bushing. A damaged oil seal or bush-
ing must be replaced.
• Avoid bottoming the inner tube into the
outer tube during the above procedure,
as the oil flow stopper will be damaged.
L LLL L LLL L L LLL L
4 - 49
CHAS
M MMM M M MMM M M MMM M MMM
L LLL L L LLL L L LLL L LLL