Yamaha YP400T Service Manual page 155

FRONT AND REAR BRAKES
È
c
É
a
d. Install new brake pads, new pad springs,
and the rear brake caliper.
NOTE:
Align the projection c on the piston side of the
brake pad with the lower recess in the brake
caliper piston.
È Up
É Down
L LLL L LLL L L LLL L
5. Lubricate:
• rear brake caliper retaining bolts
Recommended lubricant
Lithium-soap-based grease
CAUTION:
• Do not allow grease to contact the brake
pads.
• Remove any excess grease.
6. Install:
• rear brake caliper retaining bolts
7. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
8. Check:
• brake pedal operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
4 - 17
CHAS
L LLL L L LLL L L LLL L LLL
27 Nm (2.7 m · kg, 19 ft · lb)