Physis Piano K4 User Manual page 6

User Manual – Connections and controls
For more informations on
5
ZONES section: these buttons select Zones
divided into a maximum of 8 Zones, overlapping or not, sending out data to a
selcted output and MIDI channel.
Zones that are active in the currently selected Scene are indicated by blue Led
light. Inactive zones are indicated by a red Led light. Zones with no light are
disabled.
For more information on Zones, see chap. 3.3 - Zone.
6
[VIEW] button: this button is used to select the view mode of video pages on the
display. It affects the pages about Zones or other controls. When in SINGLE
mode (LED off), only one Zone and one control are shown. In ALL mode (LED on)
the page shows all Zones and controls, not just the one being currently adjusted.
This button has two functions. When pressed together with the [SHIFT] button
(press and hold) it recalls the Stand-by mode. The system will ask to confirm stand-by. Press [ENTER] to confirm.
STAND-BY MODE
When switching off the instrument through the [POWER] button, on the rear panel, all unsaved settings will be lost.
When switching it on again, the system will automatically select Performance P001. When switched off in this way,
the instrument is completely disconnected from any power source and will not consume electric energy.
Stand-By switches off the panel and the display reducing the current consumption. Pressing [VIEW] will reactivate
panel and display, and the instrument's settings will be as before.
7
Display and buttons: this section of the front panel contains the high resolution
display (480 x 272 pixels, 4,7") and the "function" buttons [F1] ... [F4]. These
buttons are assigned different functions, depending on the video page. The
corresponding function is shown on the display, just above the relevant button.
These buttons also operate two functions. When pressed together with [SHIFT]
the secondary function is activated: they select a Scene in the current
performance. This works independently from the current video page. This is
their primary function while on the main video page of PERFORMANCE
MODE.
Control Banks
and control programming, see chap. 3.3 – Control Bank, and 5.6.
.
The K4 / K5 Keyboard can be
EN - 4
S C E N E A S C E N E B S C E N E C S C E N E D