Midi Input Maps - Physis Piano K4 User Manual

Data Entry: the value NRPN or RPN.
If the message is a Program Change, they are:
Bank MSB: Bank Select MSB message number. If this is not necessary, select "OFF".
Bank LSB: Bank Select LSB message number. If this is not necessary, select "OFF".
Name: name of the sound bank selected by the Bank MSB and LSB messages. This field only works if the output is
Virtual Instrument, and if Program Bank Tables have been properly created for that Instrument through the PROGRAM
BANKS function under the SYSTEM mode, and if name have been assigned.
Program Change: Program Change MIDI message, sent when the Scene is selected, to the MIDI port and channel
assigned to that Zone. This message selects a sound. If this message is unnecessary, select "OFF". If the port is a
Virtual Instrument for which Program Bank Tables have been created (through the PROGRAM BANKS function under
the SYSTEM mode) and names have been assigned to the Program Change messages, these names appear beside
the Program Change number. Otherwise, a line of dashes will appear ("---").
If a message is System Exclusive:
System Exclusive Data: a System Exclusive message can be composed here. To enter the message, use the
encoder or the KEYPAD section buttons, then press the arrow buttons [ ] and [ ] to move the cursor among bytes.
Using the KYEPAD buttons opens the following page (see next page):
Press [F1] to enter the opening SysEx byte "F0" and [F2] to enter the close message byte "F7".
Press [F3] to erase all data.
Press [F4] or [ENTER] to confirm.
Once the MIDI message has been entered, press [F3] or [EXIT] to cancel the performed programming; press [F4] or
[ENTER] to confirm. In any case, the display shows the initializing messages.
Now, press [F2] to delete a selected message, or [F3] to modify the message, following the procedure described before.
Press [EXIT] to return to INFO MODE and EDIT MODE.
Press [INFO] to return to PERFORMANCE MODE if the system is currently in INFO mode. Otherwise, press [EDIT], or
press [EXIT] two times.
To access a different operating mode, press its corresponding button, in the MODE section of the front panel.

5.9 MIDI INPUT MAPS

Press [F4] on INFO MODE and EDIT MODE to access the second page, then press [F2] to switch to the input maps page
(see also chap. 3.3, paragraph "Input Map"). These maps (up to 8) can be used to transmit the data received from the
MIDI inputs to the outputs; ports and channels are defined here, and MIDI filters can be applied to the passing data. This is
the configuration page:
User Manual – Checking and modifying a Performance (Info and Edit Mode)
EN - 33