Modifying Scene And Performance Name; Saving A Performance - Physis Piano K4 User Manual

5.2 MODIFYING SCENE AND PERFORMANCE NAME

To modify the name of a Performance, recall the EDIT MODE, then place the cursor on the Performance name, shown
beside the location (for example "Stage Grand 1" in the first example picture of chap. 5.1), then press [ENTER]. The
display will show the following page:
To enter the name use these buttons:
[ ] and [ ]: move the cursor.
KEYPAD section buttons, or Encoder: insert a new character to the left of the cursor.
[CANC]: cancel the character to the cursor's left.
[F1]: toggle between upper (full arrow) and lower case.
[F2]: toggle between alphabet characters (abc) and digits (123).
[F3]: clears the field, deleting all characters.
[F4] or [ENTER]: save changes.
[EXIT]: abort procedure.
NB
The new name will not be saved unless the Performance is saved. If a new Performance is recalled without first
saving the current one, the new name will be lost.
To change the Performance subheading or comment, access the EDIT MODE, then place the cursor on the Performance
subheading (called "Ac. Piano" in the first example page of chap. 5.1) then press [ENTER]; to change the name, use the
same buttons described before.
To change the name of the current Scene, enter EDIT MODE, place the cursor on the Scene name ("GRAND" field in the
example page at chap. 5.1) then press [ENTER]; to change the name, use the same buttons described before.

5.3 SAVING A PERFORMANCE

To save the changes made to a Performance, press the [STORE] button. The following page will appear:
To select a different location, use the Encoder, the [DEC] and [INC] buttons or the KEYPAD section buttons.
Press [EXIT] or [F3] to leave the saving procedure.
User Manual – Checking and modifying a Performance (Info and Edit Mode)
EN - 21