Basic Functions; Switching On And Main Video Page; Selecting Performance And Scene - Physis Piano K4 User Manual

User Manual – Basic functions

4. BASIC FUNCTIONS

4.1 SWITCHING ON AND MAIN VIDEO PAGE

After connecting the cables, press the [POWER] button on the rear panel to switch on K4 / K5.
NB
The instrument needs time to load all of its settings, and therefore, it is not immediately ready after switching on.
During the process, introductory images appear on screen. When the main video page appears, the instrument is
ready.
When the instrument is ready, switch-on images disappear and the main video page appears on the display. Now the
instrument is ready.
If the internal sound board
general volume.
The standard mode is PERFORMANCE MODE. It is the most common mode and shows general data on the selected
Performance.
Performance Location – Performance Name / Scene Name > current page name
Performance
Location
Currently selected
(active) Scene
Zones status
Active Scenes

4.2 SELECTING PERFORMANCE AND SCENE

There are three ways to select a performance while in PERFORMANCE MODE:
•
rotate the encoder,
•
press the [DEC] and/or [INC] buttons,
•
enter the code of a Performance location, by using the KEYPAD section buttons.
•
Press [ENTER] to display the list of all the available Performance:
Physis EX
has been installed, (only for K4 EX and K5 EX), the [AUDIO] slider controls the
Enabled Scenes,
can be selected
through function buttons
Disabled Scenes
EN - 14
Current function
mode
Performance
name
Performance subheading
or comment
Current Scene Name