User Manual – Basic functions
4.3 CHECK ZONE STATUS
Use the buttons from the ZONES section to activate and deactivate Zones. As for the LEDs of the [ZONES], also
PERFOMANCE MODE screen informs you about the status of the Zone, therefore:
•
blue rectangle: Zone is active.
•
red rectangle: Zone is inactive.
•
light gray rectangle: control Zone.
•
dark gray rectangle: Zone disabled.
These fields also show further information:
Zone number
Transmitted
Program Change
or selected Sound
For more information on the status of the Zones, see par. 3.3 - Zone section.
4.4 SELECTING CONTROL BANKS
To select a different Control Bank among inactive ones (keep in mind that disabled banks cannot be activated, unless they
are previously enabled in EDIT MODE), press the corresponding button [BANK 1] ... [BANK 4].
The button Led turns blue, while the Led light of inactive banks turns red. The display shows for a few seconds the initial
settings of the controllers (CONTROLLERS section) for the current Control Bank.
These can be set in in EDIT MODE:
Pressing twice quickly, the [BANK 1] ... [BANK 4] button, the screen remains until the pressure of the same button or
another [BANK 1] ... [BANK 4], or [EXIT] .
Transmitting
MIDI port name
MIDI channel
EN - 16