Loading Performances Or Virtual Instruments From Internal Memory Or Usb Drive - Physis Piano K4 User Manual

User Manual – Utility functions and data transfer
The Item field specifies which section of the Scene will be copied.
The Source fields show the Performance, the Scene and possibly the Bank of Controls in which the parameters are to be
copied.
The Destination fields show the current Performance (non-selectable), the Scene and possibly the Bank of Controls that
will be copied to the parameters defined in Source:.
In the example above, the entire Control Bank 1 of the Scene A, Performance P003 is being copied to Control Bank 2,
Scene B, Performance P001.
For further information on the Item field, see the field description in chapter 8.1.
Once the selection is complete, press [ENTER] or [F4] to start the procedure. A pop-up message will appear, asking you
to confirm:
and also reports the section from which the data will be copied (COPY field) and to which it will be copied (TO field)
Again, press [ENTER] or [F4] to confirm.
Press [EXIT] or [F3] to abort the procedure and return to the previous page.
NB
When the copy is complete, it is necessary to save the Performance, or the changes might be lost.
8.3 LOADING PERFORMANCES OR VIRTUAL INSTRUMENTS FROM
INTERNAL MEMORY OR USB DRIVE
K4 / K5 allows you to create backup copies of Performances and Virtual Instruments, saving them to a dedicated section of
the instrument's internal memory, or to an external USB drive (connected to one of the rear panel USB ports: [HOST 1-2] or
[HOST 3-4]).
This allows to store more than the standard 128 Performances and 10 Virtual Instruments, and also to create backup
copies for safety reasons.
The saving procedure is described in chap. 8.4.
To load a Performance file, access the PERFORMANCE MODE or any INFO or EDIT page, then press [SHIFT] and [7
PQRS] at the same time. Doing so will recall the LOAD function.
The following page will appear:
To load a Virtual Instrument instead, access one of the INSTRUMENTS page of the SYSTEM mode and press the same
buttons metioned before.
EN - 52