Physis Piano K4 User Manual page 22

User Manual – Checking and modifying a Performance (Info and Edit Mode)
Here is an example of the display in both view modes:
VIEW=ALL
To move the cursor, use the arrow buttons: [ ], [ ], [ ] and [ ].
Press [EXIT] to leave the page and go back to the INFO MODE or EDIT MODE menu (depending on the current operating
mode), or press [INFO] or [EDIT] (as before) to go back to PERFORMANCE MODE.
To toggle between these modes, use the related buttons in the MODE section of the front panel.
To enter data in the system, use the the encoder, the [DEC] and [INC] buttons, the KEYPAD section buttons, or press
[ENTER].
When pressing KEYPAD buttons or [ENTER], the following pages appear:
pressing KEYPAD buttons
These example pages appear when trying to enter data in the Program Change column:
On the first example page, to move the cursor (the white bar) press the arrow buttons [ ] and [ ].
Function buttons [F1], [F2], [F3] and [F4] perform the functions shown on the display, just above each button. Press [F1] to
select the minimum available value for each parameter; press [F2] to select the maximum value. Press [F3] to erase all
data; press [F4] (or [ENTER]) to confirm and return to the previous page. To cancel the procedure, press [EXIT].
On the second example page, use the arrow buttons [ ], [ ], [ ] and [ ] to move the cursor (the white rectangle).
Press [F4] (or [ENTER]) to select the value indicated by the cursor; press [F3] (or [EXIT]) to cancel selection. In both cases,
the display will return to the previous page.
Other functions may be available. In this example, [F2] enters the "OFF" value.
NB
Changes made to a Scene parameters by following the procedure explained in this chapter will be retained when
selected a different Scene but are lost when selecting a different Performance (unless they have been saved).
pressing [ENTER]
EN - 20
VIEW=SINGLE