4.5 KEYBOARD TRANSPOSITION
Transposition affects the whole keyboard, in spite of the currently selected Scene or Performance. To apply transposition,
press the [TRANSPOSE] button. When the Led light is on, the function is active, otherwise it is inactive.
The PERFORMANCE MODE page shows the transposition value in semitones:
To adjust transposition, press and hold the [TRANSPOSE] button and rotate the encoder [DATA ENTRY] or press [DEC] to
decrease, or [INC] to increase. the transposition range is of
transposition.
4.6 SCREEN VISUALISATION MODES
Some video pages have different visualisation modes: they can either show all information together, giving a global
overview, or only the information relevant to what is currently being modified. The [VIEW] button switches between these
two modes, according to the following rule:
−
when the Led light is on, all information is displayed
−
when the Led light is off, the display shows only information about what is being modified
Two types of video pages have these two view modes: pages related to the CONTROLLERS section (front panel) and
pages about Zones (ZONES section under INFO and EDIT modes). Using a control ([SLIDER 1] in the example below),
one of these two pages will appear, according to the selected view mode.
VIEW=ALL
In INFO and EDIT modes, when visualizing a Zone configuration (Zone 1 in the following example) the display will show
one of these two pages, according to the currently selected view mode:
VIEW=ALL
±
24 semitones. Pressing both at the same time nullifies
EN - 17
User Manual – Basic functions
VIEW=SINGLE
VIEW=SINGLE