Utility Functions And Data Transfer; Initialising Scenes - Physis Piano K4 User Manual

User Manual – Utility functions and data transfer

8. UTILITY FUNCTIONS AND DATA TRANSFER

8.1 INITIALISING SCENES

To initialize a Scene means to configure it with standard settings that make its programming easier. The function is
contextual, that is, does the entire Scene or individual sections of the same Scene, according to the menu from which it is
called. Therefore, the parameters that are going to be reset are those shown at the time of the function call.
To initialize a Scene, press [EDIT] to access the EDIT mode and the initialising page. Now press [SHIFT] and, at the same
time, press the [1 .,?!] button (which recalls the INIT function).
The following page is an example:
The Item field indicates the Scene section that will be initialized.
Destination fields, which are contextual, that is, the content and number of which varies depending on the screen in which
you are located, report the current Performance (not editable), the Scene, and possibly the bank of controls where are the
parameters to be initialized.
In the example page above, the destination is Control Bank 1 of Scene A in Performance P001.
The available values of the Item field vary according to the operating mode from which the initializing page was accessed.
if accessed from the EDIT MODE page, available values are:
-
ENTIRE SCENE: the entire Scene, selected through the Destination field,
-
ALL ZONES: all Zones of the Scene selected through the Destination field,
-
ALL CTRL BANKS: all Control Banks of the current Scene, selected through the Destination field,
-
ALL PEDALS: all pedals of the current Scene, selected through the Destination field,
-
ALL WHEELS: all wheels of the current Scene, selected through the Destination field,
-
ALL MESSAGES: all auxiliary message of the current Scene, selected through the Destination field,
-
ALL INPUT MAPS: all MIDI input maps of the current Scene, selected through the Destination field;
if the previous page was one of the EDIT MODE \ ZONES pages:
-
ALL ZONES: all Zones of the current Scene, selected through the Destination field,
-
ZONE 1, ZONE 2, ZONE 3, ZONE 4, ZONE 5, ZONE 6, ZONE 7, ZONE 8: single Zones of the current Scene,
selected through the Destination field;
if the previous page was EDIT MODE \ CTRL BANKS \ BANKS:
-
ENTIRE BANK: the entire Control Bank and Scene, selected through the Destination field,
-
ALL KNOBS: all knobs of the Control Bank and Scene, selected through the Destination field
-
ALL SLIDERS: all sliders of the Control Bank and Scene, selected through the Destination field,
-
ALL BUTTONS: all buttons of the Control Bank and Scene, selected through the Destination field;
if the previous page was EDIT MODE \ CTRL BANKS \ KNOBS:
-
ALL KNOBS: all knobs of the Control Bank and Scene selected through the Destination field,
-
KNOB 1, KNOB 2, KNOB 3, KNOB 4, KNOB 5, KNOB 6, KNOB 7, KNOB 8, KNOB 9: single knobs of the
Control Bank and Scene selected through the Destination field;
if the previous page was EDIT MODE \ CTRL BANKS \ SLIDERS:
-
ALL SLIDERS: all sliders of the Control Bank and scene selected through the Destination field,
-
SLIDER 1, SLIDER 2, SLIDER 3, SLIDER 4, SLIDER 5, SLIDER 6, SLIDER 7, SLIDER 8, SLIDER 9: single
sliders of the Control Bank and Scene selected through the Destination field,
if the previous page was EDIT MODE \ CTRL BANKS \ BUTTONS:
-
ALL BUTTONS: all buttons of the Control Bank and Scene selected through the Destination field,
EN - 50