Scenes - Physis Piano K4 User Manual

User Manual – Checking and modifying a Performance (Info and Edit Mode)
Press [ENTER] or [F4] to save the Performance. A system message appears:
Now press [ENTER] or [F4] to confirm and save; otherwise, press [EXIT] or [F3] to abort and return to the previous page.

5.4 SCENES

To enable or disable a Scene enter EDIT MODE, then select the Scene from the left field (see picture) suing the [DEC] and
[INC] buttons or the encoder:
Scene selection
field
An alternative procedure to disable a Scene is to select it from the PERFORMANCE MODE by pressing the function
buttons and then recall EDIT MODE; then place the cursor on the square beside the Scene name:
Enable/disable
Scene field
then press the [DEC] and [INC] buttons or use the encoder to enable ( ) or disable (empty field) the Scene.
Keep in mind that a disabled Scene cannot be selected in PERFORMANCE MODE, mainly to avoid selecting the Scene by
mistake. A disabled Scene is shown in grey on the display, above the function buttons (see example page at chap. 4.1).
EN - 22