Physis Piano K4 User Manual page 50

User Manual – General instrument settings (System Mode)
NB
When saving, an already existing file with the same name can be overwritten; otherwise, you have to assign a different
name to the file you are currently saving (see chap. 8.4).
Files can also be renamed after they have been saved (see chap. 8.3 - Utility functions).
RESTORE
Use this function to load on the instrument the configurations saved through the BACKUP function.
To do so, place the cursor on the RESTORE field and press [ENTER]. The following page will appear:
The page looks like the one described at chapter 8.3. Therefore, to read about folders selection memory unit selection, file
saving and so on, see the aforementioned chapter. For a description of UTILITY functions, see chap. 8.3 – Utility functions.
Loading this file will affect all the instrument's settings, and all unsaved data will be lost. That is why the system asks for
confirmation:
All current settings will be replaced by the contents of the backup file. Press [ENTER] or [F4] to confirm, and load the file.
Press [EXIT] or [F3] to abort and return to the previous page.
Backup files are very large and contain wide amounts of data; loading will take some time. In the meanwhile, this message
appears on the display:
do not switch off the instrument until the process is complete.
EN - 48