Physis Piano K4 User Manual page 30

User Manual – Checking and modifying a Performance (Info and Edit Mode)
Here you can find information on the selected Control Bank and on the status of all controls.
On the top of the page there are two fields:
Name: name assigned to the control bank.
Enable: bank status; can be:
-
ON: bank enabled; press the [BANK 1] ... [BANK 4] buttons to activate/deactivate.
-
OFF: bank disabled; the [BANK 1] ... [BANK 4] buttons have no effect.
The field on the right shows the currently selected Control Bank.
The page shows in graphic form the current status of all controls; using controls (such as pressing a button, or rotating a
knob) immediately affects the data on this page (see also chap. 4.7).
Buttons appear in yellow if they are set as "on" or in STEP mode (see Knobs, Sliders and Buttons below).
Press [F1] to see information on the next Control Bank.
To see more pages under the CTRL BANKS section, press the function buttons [F1], [F2], [F3] or [F4].
Press [EXIT] to return to INFO MODE and EDIT MODE menus.
Press [INFO] to return to PERFORMANCE MODE if the system is currently in INFO mode. Otherwise, press [EDIT], or
press [EXIT] two times.
To access a different operating mode, press its corresponding button, in the MODE section of the front panel.
KNOBS, SLIDERS and BUTTONS
From the BANKS page, press [F2] or move the cursor to the right to visualize the second configuration page, the KNOBS
page. The knobs [KNOB 1] ... [KNOB 9] can be controlled from here.
Press [F3] or move the cursor to the right to access the SLIDERS page, related to the cursor controls [SLIDER 1] ...
[SLIDER 9].
Press [F4] or move the cursor to the right to access the BUTTONS page, related to the [BUTTON 1] ... [BUTTON 9]
controls.
Press the function buttons [F1], [F2], [F3] or [F4], or move the cursor to the left, to return to the previous pages.
Available parameters are:
Type: type of MIDI message transmitted by the control, can be
-
OFF: no MIDI message assigned
-
CC: Control Change
-
NRPN: Non Registered Parameter Number
-
RPN: Registered Parameter Number
-
PITCH: Pitch Bend
KNOBS
BUTTONS
EN - 28
SLIDERS